2024 Case IH Sicklebar Headers HDX142

Information

2024 Case IH Sicklebar Headers HDX142

Sicklebar Headers

Using the counter-stroking action of dual sickles, Case IH HDX 2 series sicklebar headers shear the crop cleanly, even in the heaviest of conditions. The unique floating auger keeps the crop moving smoothly to the conditioning rolls. Available in three cutting widths, from from 14’ 3” to 18’ 3”.

Made for the Toughest Situations

The Case IH HDX 2 Sicklebar Header uses a counter-stroking action of dual sickles to shear crop cleanly while the unique floating auger keeps the crop moving smoothly.

Delivering high-quality harvesting results in a compact design, the HDX142 sicklebar header is a great match for Case IH WD5 series self-propelled windrowers.

Features may include:

Designed for a Cleaner Cut

The Case IH HDX series sicklebar headers are engineered to deliver a long life and a cleaner cut. Featuring bolt-on knife sections, hydraulic angle adjustments from 6 to 12 degrees below horizontal, a unique floating auger and easily adjustable skid shoes.

Built to Work in Heavy Crop Conditions

The HDX 2 Series Sicklebar Headers feature a conditioning system that is built to work in heavy crop conditions. Conditioning rolls crimp stems thoroughly for fast dry down. The roll pressure system uses a torsion bar, which allows conditioning rolls to automatically separate to clear slugs and the chevron pattern provides even windrow formation.

There are three options available: Rubber-on-Rubber, Steel-on-Steel, and Hi-Contact

Available Options on the WD5 Windrowers and HDX 2 Series
  • In-cab control of reel speed
  • In-cab control of windrow width
  • Header gauge wheels
  • Crop dividers

Photos

Highlights

  • Belleville, Ontario
  • 2024
  • Case IH
  • Sicklebar Headers HDX142
  • Available
  • Roll: 102 in. (2591 mm)
  • Cutting Range: 1.2–6.2 in. (30.5–157 mm)

Specifications

  • 2024
  • Case IH
  • Sicklebar Headers
  • HDX142
  • Windrowers
  • Right-hand and left-hand wobble with shaft drive | Reel: Belt and chain | Roll: Spur gearbox & PTOs
  • Sickle Drive: 1,810 spm | Mech. Drive: 52–83 rpm | Conditioning Roll: 717 rpm | 287 rpm (with 45T driven sprocket)
  • Angle Range: 6–12 degrees | Maximum Diameter: 42 in. (1067 mm) | Tine Bars Segmented; 1.25 in. (32 mm) bearings at the cam end; 1.25 in. (32 mm) bushings at all other locations | Reel Bushings: 2 in. (50.8 mm) | Roll Diameter: 10.375 in. (263.5 mm) | Floating Range: 2 in. (50.8 mm)
  • 14 ft. 3 in. (4.34 m)
  • 16 ft. 3 in. (4.95 m)
  • Cutting Range: 1.2–6.2 in. (30.5–157 mm)
  • 3 in. (76 mm)
  • Roll: 102 in. (2591 mm)
  • 20 in. (508 mm)
  • Flighting: 5 in. (127 mm)
  • 36–96 in. (914–2438 mm)
  • Rubber Rolls: 3,900 lb. (1770 kg) / Steel Rolls: 4,000 lb. (1815 kg)
  • Knives: Overserrated, bolted | Guards: 2-tine, double hardened | Sickle Drive Type: Open dual wobble | Reel Type: 5-bat | Auger Type: Single, floating
  • Timed dual counterstroking
  • Skid Shoes: 4 | Reel: Fore/aft and vertical / Variable sheave | Gap / Pressure Adjustments: Stop bolts / Hand crank
  • Rolls–Intermeshing Chevron: Rubber-on-rubber, steel-on-steel